How to process solid wood door-- Guangxi Zonle doors industry

（1）Blanking → covering decorative veneer, lining board → aging → trimming → sanding → grooving → covering decorative veneer → aging → trimming → sanding → grooving

（2） blanking → covering decorative veneer, lining board → aging → trimming → sanding → covering decorative veneer → trimming → sanding → mortise

（3） processing frame parts for the wedge - maturing - tenon - wedge box, real wood door frame integrated timber frame of whole wood inner core norms is lesser, and use of the advantages of integrated timber, lumber is less, the moisture content is relatively uniform, effectively avoid pure real wood door frame easily occur crack when the environment temperature and humidity changes, the phenomenon such as warp, deformation; Secondly, because the core material is covered with decorative veneer of precious tree species with a thickness of 3-5mm, the original texture and color of the wood are well maintained. If the decorative veneer is carefully and strictly selected before covering, the overall appearance effect of the door frame is more beautiful and harmonious, and there is almost no difference with the pure solid wood door frame. The covering of all decorative veneer on the door frame is required to be carried out on the hot pressing and assembling equipment to ensure that the glue between the decorative veneer and the inner core is firm, the joint is tight and the overall strength is good.

Another production process of integrated solid wood door frame is: the decorative veneer can be used to make the door fan of MDF waste material covered with thinner decorative veneer or plywood edge strip to replace, can further reduce the material cost; As plywood is prone to surface cracking during secondary hot pressing, 2.5mm or 3mm MDF is generally used to cover and 0.3-0.7mm decorative veneer is used.

For more details, please visit the official website of Zonle Wooden Door: http://www.zonledoors.com