Wooden doors have always been respected by the city level in the mid-end consumer market, because its price compounded the level of mid-end consumption. However, cities and counties are not like rural areas where a lot of time is wasted on decoration, so the production time of wooden doors is not sloppy at all. For wooden door manufacturers, the length of production time is affected by the process. Therefore, the following editor will introduce the paint process of wooden doors to you.
1. Baking paint: apply primer three times and topcoat four times on the base material, and send it to the dust-free constant temperature baking room for baking every time the paint is applied.
2. Spray paint: Grind the wool on the substrate, then spray paint on it, and let it dry naturally.
Practice: touch the four edges and corners of the varnished door panel by hand to see if it is smooth and credible; observe the color of the edges and corners to see if it is the same color as the door panel.
Compared:
1. Baking paint: smooth edges and corners, the same color. It proves that the paint film is uniform and the color is full.
2. Spray paint: the edges and corners are rough, and the color is lighter than the door panel. Prove that the paint film is not uniform and the color is not full:
3. Texture
Practice: Check the light to see if there is orange peel on the surface of the painted door panel.
Compared:
1. Baking paint: the surface of the door panel is smooth, without lines and orange peel.
2. Spray paint: The surface of the door panel is textured, not smooth, and has orange peel phenomenon.
4. Surface
Method: Touch the surface of the painted door panel with your hands to see if there are dust particles and air bubbles.
Compared:
1. Baking paint: the surface of the door panel is flat and smooth.
2. Spray painting: There are particles on the surface of the door panel, which are not smooth and feel strange to the touch.
Five, wear-resistant
Method: Hit with a hard object.
Compared:
1. Baking paint: there is no abnormal situation, and the paint film is not damaged.
2. Spray paint: There are cracks, serious paint film peeling off, and white skin.